Dacor AERB30G06 User Manual
Page 2
Dacor ● 1440 Bridge Gate Drive, Diamond Bar, CA 91765 ● Tel: (800) 793-0093 ● FAX: (626) 403-3130 ● www.Dacor.com
STEP 7: Remove the protective plastic cover
from the new backguard.
STEP 8: Place the new backguard over the back
of the range. The backguard fits over
the exhaust duct sticking up on the
back of the unit. Be sure to slide the
tabs on the back of the backguard in-
side the flanges on the back of the unit.
STEP 9: Fasten the backguard in place with the
three (3) existing chrome plated screws.
STEP 10: Tighten the two (2) top screws on the
back of the side panels.
STEP 11: Reinstall the grates.
STEP 12: Turn on the gas at the gas supply valve.
Connect the power cord to the electrical outlet.
Backguard
Exhaust
Duct
Chrome Plated
Screw, 3 Places
Screw,
2 Places
Tab
Flange