Dimplex Electric Fireplace DF1136L - Manual (Page 11)

11
Pedestal Installation
Instructions
WARNINg: Failure to install
the fireplace as instructed
below may result in damage
to the equipment and or may
expose the user to the risk of
fire, serious injury, illness or
death.
CAUTION: High temperature,
keep electrical cords, drapery,
and other furnishings at least
3 ft (0.9m) from the front of the
heater and away from the side
and rear.
Tools Required
#2 Phillips screwdriver •
Carefully lay the fireplace 1.
down on its front.
!
NOTE: If necessary, lay a
protective barrier between the front
glass and your work surface, (i.e.
cloth, cardboard, thick plastic) to
avoid scratching the glass or your
work surface.
Assemble the pedestal by 2.
attaching the vertical supports
to the base. (Figure 7)
Position the pedestal on the
3.
back of the firebox so that
it lines up with the provided
mounting holes.
Fireplace Installation
Figure 8
Pedestal
Figure 7
base
verticle
Supports
secure the pedestal to the 4.
firebox with the provided
screws. (Figure 8)
orient the firebox so that it is
5.
standing upright.
Mount hardware for trim in-
6.
stallation to unit as described
in installation guide provided
with trim.
Carefully pour and evenly dis-
7.
tribute the supplied media in