Adjusting the legs, Electrical connection – Beko B 1901 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4- You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
even if the compressor is not running
and this is quite normal. Due to the
operation of fans inside the appliance,
overall noise level Is slightly higher
in comparison to non-frost free
appliances. This is quite normal and
is not a fauit,
5- Front edges of the refrigerator may
feel warm. This Is normal. These
areas are designed to be warm to
avoid condensation.
Adjusting the legs
If your refrigerator Is unbalanced;
You can balance your refrigerator by
turning the front legs of It as Illustrated
In the figure. The corner where the
leg exists Is lowered when you turn
In the direction of black arrow and
raised when you turn In the opposite
direction. Taking help from someone to
slightly lift the refrigerator will facilitate
this process.
Electrical connection
Connect your refrigerator to a
grounded socket which Is being
protected by a fuse with the
appropriate capacity.
Important:
• The connection must be in
compiiance with national regulations,
• The power cable plug must be easily
accessible after Installation,
• Voltage and permitted fuse protection
are indicated in the “Specifications”
section,
• The specified voltage must be equal
to your mains voltage,
•
Extension cabies and multiway plugs
must not be used for connection,
A A damaged power cable must be
replaced by a qualified electrician,
A The appliance must not be operated
before it is repaired! There is danger
of electric shock!
9 I
EN