Audiovox CMT-1000 - Manual (Page 3)

FEATURES AND OPTIONS
Push Button Dialing^
10 Digit Dial Number Display
16 Di^t Extended Readability
On-Hook Dialing
Reset Dialing
End-to-end Signalling
Repertory Dialing up to 30 Numbers shared with
Electronic Scratch pad.
Last Number Redial
Horn Alert
Electronic Lock
Back Lighting of Key Buttons in the Handset,
Back Lighting of All Control Labels in the Base Unit.
Electronic Scratch-pad Memory
Listen or Mute Button
Flexible Mounting
Rear Seat Extension (option)
Hands-Free Operation by Headset (option)
Electronic Message Recorder (option)
GENERAL SPECIFICATIONS
(subject to change without notice)
Frequency Range:
Number of RF Channels:
Channel Spacing:
Duplex Spacing:
Frequency Stability;
Operating Temperature:
Supply Voltage:
Current Drain:
SÌ2C:
Transceiver:
825 to 845 MHz Transmit
870 to 890 MHz Receive
666 Full Duplex
30 kHz
45 MHz
±2.5 PPM
■30“ to+60X
13.7V DC, ±2096, Negative Ground
3A in use, lA standby
Telephone Unit:
Weight:
Transceiver:
Telephone Unit;
RF Power Output:
Conducted Spurious:
55H X 220Wx 300D (mm)
2.16H X 8.66W X 11.81D (inches)
75H X 105WX 240D (mm)
2.95H X 4.13WX 9.44D (inches)
4.0 kg (8.8 lbs)
1.5 kg (3-3 lbs)
3 watts minimum (50 ohms)
60 dB Below Carrier
TELEPHONE UNIT
FUNCTIONS
volume cxintrol sets the speaker volume,
(2)1^^ volume control adjusts the handset
volume.
(3) [Afe^^ volume switch (3-position) adjusts the alert
(ringing) level.
(4) iHANQg-fgigEl bunon and indicator changes the
audio from the handset to the control unit speaker.
( 5 ) button and indicator changes the audio
from the handset to the speaker—also functions as
a MUTE button.