Daewoo DSC-34W70N - Manual (Page 35)

1.Press “MTS” button.
•Whenever this button is pressed the mode status shifts in the following sequence:
Mono Stereo SAP.
•Press “RECALL” button on the Remote Control to check the program transmission
mode.
•When the program transmission is in stereo mode, select “Stereo” to receive the
stereo sound.
•If the quality of stereo sound is not clear, set it in “Mono”, then you should have less
noise.
•When the program transmission is in “SAP” mode, select “SAP” to receive “SAP”
broadcasting.
Mono Stereo SAP
35
L When transmission signal is low or
broadcasting condition is not good,
sound might be cut off temporarily.
This type of malfunctioning is not
caused by the TV set. In this case,
press “MTS” button, and shift the
mode into “Mono” .
L The Second Audio Program (SAP)
settings offers you the option of
listening to either of two separate
audio programs , such as a second
language broadcast.
Receiving Stereo or SAP Mode Programs
Air 44
Mono
Mono Stereo
SAP