Denso OFFICE PRO 12 - Manual (Page 10)

4
INSTALLATION
Choosing an Installation Site
ƽCAUTION: Following are some precautions to consider before
choosing your installation site. Please review carefully as improper
installation may result in personal injury or damage to the unit.
• Do not use the unit in areas where leakage of flammable gas may
occur.
• Do not use the unit in areas where it will be exposed to rain or
water.
• Do not use the unit in an atmosphere of excessively corrosive gas
or vapor.
• Do not use in areas where the temperature is outside the allowable
operating range.
• Do not install the unit in sloping areas. The unit may move or topple
over even if the casters are set to the LOCKED position.
• Install the unit in areas that can withstand the weight of the unit.
The Office Pro 12 unit weighs approximately 200 lbs (91 kg) and the
Office Pro 24 weighs approximately 245 lbs. (111 kg) (when the
drain tank is full of water).
• Allow 18 inches of unobstructed airflow for both the air inlets and
outlets.
• Do not use the unit above 95˚F 50% RH.