Daewoo DVG-5200S - Manual (Page 19)

18
BASIC OPERATIONS
SYSTEM SETTING
V-MODE (Only when the player has component jack)
• If the system of the TV is PAL, push "SYSTEM" once.
• If the TV is multi-system, push "SYSTEM" twice.
• If the system of the TV is NTSC, push "SYSTEM" three
times.
According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
Push SYSTEM button on the remote control, then choose TV TYPE.
SYSTEM
V-MODE • In case of connecting the component, press the V-MODE
on the remote control to select YUV (Y, Pb, Pr).
• When you connect the Composite or S-VIDEO and picture
is not displayed, press the V-MODE on the remote control
to check if DVD player position in the video mode.
DISPLAY
Each time you press “DISPLAY” button when playing a disc, the TV screen
shows the information as :
• TITLE ELAPSED ➝ TITLE REMAIN ➝ CHAPTER ELAPSED
➝ CHAPTER REMAIN ➝ DISPLAY OFF
T: ** / ** C: ** / ** **: ** : **
• SINGLE ELAPSED ➝ SINGLE REMAIN ➝ DISPLAY OFF
T: ** / ** **: ** : **
DISPLAY
Something disc
DVD
• SINGLE ELAPSED ➝ SINGLE REMAIN ➝ TOTAL ELAPSED ➝ TOTAL REMAIN
CD
• Folder
MP3