beautypg.com

Changing the reversible door – Avanti 248RW/RC/RB User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

’Important Safety Instructions''

, * i

'7

‘ " ' r r

.V

AWARNING

To reduce the risk of fire, electrical shock,or injury when

using your refrigerator, follow these basic precautions:

Reid iD Instractions before nsisE the refrfgeritor,

Child catripment snd safTocatloo are oot problenu of the past. Janked or aban­

doned refrigerators are sdO dtngerons.“ even if they wiD *Jast sit In the garage a few
days'

If yon are getting rid of yonr old refrigerator, do It safely.Pleaie read the safety

booklet from the Association of Horae Appliance Manafactnrers, Help prevent accidents.

Never allow children to operate.pUy with, or crawl inside the refrigerator

Never clean refrigerator parts with flammabU fluids. The fumes can create a

fire hazard or explosion.

■ FOR YOUR SAFETY •

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS

AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE

FUMES CAN CREATE A FIRE HAZARD OR EXPLOSION.

-SAVE THESE INSTRUCTIONS-

Changing the Reversible Door

This refrigerator comes from the frctoiy with the door hinges

on the right.

If you wish to change the opening direction,follow instructions
below.

1. Using a sharp object, pry out the 3 plug buttons. Save the

plugs for later use.

2. Remove the upper hinge cover.
3. Remove the 2 phillips screws which connect the upper hinge

to the cabinet top.

4. Carefully lift the door, placing it on a padded surface to

avoid scratching.

5. Set the refrigerator door in its new position, making sure

the hinge pin enters the bushing at the bottom of the cabinet

6. While holding door in the closed positionjoosely secure the upper

hinge using the parts removed in step 3, Before tightening the
screws, rria'ke sure the top of the door is level with the cabinet

top.

7. Replace upper hinge cover.
8. Replace aU 3 plugs removed in step 1 to cover the holes at the

right

.

4

.