The hooks must not be clipped over the element – AEG 520B User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing
the shelf
supports
26
Shelf supports
To clean the sides of the oven, the shelf supports (see illustra
tion) can be removed.
Pull the shelf support at the bottom, towards the centre of the
oven and unhook from the top, Replace in reverse order.
Fold down grill/top heating element in the main oven.
My grill/top heating element can be folded down to facilitate occa
sional cleaning of my oven root.
Warningl Before you proceed ensure that the element is
cold and all my oven controls are switched off.
Turn the 2 holding screws to the centre. The element folds down
giving you access to the oven root (see illustration)
Warning! Do not force the element too far down otherwise
you run the risk that it breaks off.
After cleaning, push the element upward and turn the hooks back
ensuring that the
crossbar of the element
is secured within the
hooks.
The hooks must not be clipped over the element.
Z)
o