AEG 520B - Manual (Page 24)

Main oven
Cleaning the
lamp cover
or replacing
the oven iamp
Oven
lighting
24
If your oven has a catalytic root, sides and back panel either as
standard equipment or it you have bought these parts separately
and fitted them, then the following information will be of interest to
you.
The liners help to keep the oven cleaner as they clean themselves
to a great extent during roasting and baking at temperatures
above 200 °C. As cleaning may be improved by exposure to a
higher temperature it may be necessary to run the oven at 250 °C
tor 1 or 2 hours per week. Before carrying out such a heat cycle,
remove all oven equipment and make sure that you have cleaned
the unlined surfaces to prevent any soil from baking on. For isolat­
ed stubborn stains use a soft bush and very hot soapy water.
Never use abrasive cleaners or scouring powders.
Warning! Isolate my oven from supply before replacing my
oven lamp.
To clean the glass cover or change my oven lamp the glass cover
can be taken oft by turning it anti-clockwise.
You can illuminate my oven tor cleaning. To do this, turn my
oven control knob or my cooking method selector to the lamp po­
sition ¡5|.
■ Thorough cleaning
■ For thorough cleaning, you can remove various parts: