Vom-58 operations manual – ASA Electronics VOM-58 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VOM-58 OPERATIONS MANUAL
2. MIR/NOR OPTION
Monitor switch position in "MIR" position
Voyager camera switch (magnet) in "MIR" position
- This combination will result in an inverted (mirrored) image that is correct for rear (back-up) camera use.
- If the opposite image is required for applications other then rear (back-up) camera use, either the monitor or the camera
switch should be set to the "NOR" position.
- Make sure that monitor/camera switch settings are correct for your particular application.
3. AUDIO JACK
- Connects audio connector to an (optional) external speaker.
4. CA1/CA2 INPUTS JACKS
- In single camera applications the camera should be connected to CA1 Monitor Input.
- A Rear/Back-up Camera should be connected to CA1 Monitor Input in any application.
Reverse trigger Feature
Applying +12 Volts to Blue/Reverse Trigger lead serves two functions:
1) Monitor comes ON from Stand-by mode and switches to CA1 input.
2) Monitor Input will switch from CA2 to CA1 while +12 Volts is applied.
6
Voyager