Vom-58 operations manual, Vom-58 5 – ASA Electronics VOM-58 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FUNCTIONS AND OPERATION
Front of Monitor : See FIGURE 4
1. Power switch : STD. BY- Monitor operates when vehicle transmission is switched into
"REVERSE" ON - monitor and system operate when ignition switch is "ON"
2. CA1/CA2 switch : "CA1" used mainly for rear mounted camera or as specified by the installer.
"CA2" used mainly for side or mirror mounted camera or as specified by the installer.
3. Day/ Night switch : Pre-set brightness and contrast levels optimized for day or night operation.
4. Contrast
: Variable control of contrast. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
5. Brightness : Variable control of brightness. Should be adjusted if the "DAY/ NIGHT"
switch does not achieve the most desirable picture.
6. Volume
: Variable control of internal speaker volume.
FUNCTIONS AND OPERATION CONTINUED
Rear of monitor : See FIGURE 4
1. POWER CONNECTION :
VOM-58 OPERATIONS MANUAL
Pin No.
Description
I
N/C
2
Power ( DC 12V or 24V)
3
Ground
4
N/C
5
Trigger In (DC 12V or 24V)
6
N/C
VOM-58 5