Aiwa ADC M55YU - Manual (Page 11)

SPECIFICATIONS
Notes on the disc magazine
• Be sure to align the edge of the disc to both
grooves of the disc tray when you set the disc.
If a disc is not set properly, it may cause
damage to the unit.
Compact disc changer
' The disc tray may be taken off from the magazine
if you pull the tray forcibly. If the tray was taken
off, push it into the magazine while pressing the
part ® as illustrated. Be sure that both ends of
the tray are aligned to the grooves of the
magazine correctly.
System
Frequency response
Wow and flutter
Signal to noise ratio
Outputs
Operating temperature
Dimensions
Weight
Power requirement
D/A converter
Sampling rate
Disc size
Supplied accessories
Compact disc digital audio
system
5 Hz - 20 kHz
Below measurable limit
91 dB or more
Line output (for changer
connector only)
-10°Cto55 °C
225 X 63 X 175 mm (w/h/d)
(8 % X 2 Va X 7 in.)
1.7 kg
(3.74 lbs.)
12 V DC car battery
(negative ground)
1 bit DAC, 8 times over
sampling
44.1 kHz
120 mm
Disc magazine (1)
Mounting kit (1 set)
Connecting cable (5 m)
(16.4 ft.) (1)
Design and specifications are subject to change without
notice.
Groove
■Disc
magazine
Groove
ENGLISH
10