Avanti 309YBT User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
> CHANGING THE REVERSIBLE DOOR
1. Remove the leveling leg attached to the bot
tom hinge
2. Remove the two screws and washer that holds
the bottom hinge to the cabinet, using a( +)
screwdriver. Keep these screws and washer
for later use.
3. Lower the refrigerator door straight down to
free the middle hinge pin from the socket on
the top of the door and pull forward.
4. place the door on a padded surface to prevent
scratching it.
5. Remove the other leveling leg on the opposite
side.
6. Remove the two screws that holds the middle
hinge to the cabinet using, a ( + ) screwdriv
er. Keep №ese screws for later use.
7. Lower the freezer door straight down to unlock
the bott - pins the countertop from the socket
on the top of the door and pull forward.
8. Remove the bott - pin of the countertop using
( + ) swewdriver attached to the counter-
top. Save this bolt - pin for later use.