D-Link DP-G310 - Manual (Page 12)

12
When you enter the default IP address, the main screen of the Print Server’s con-
figuration will appear (see below). In addition to the product information, you can
access and control the Print Server’s configuration through four links on the top of
this main screen: Home, Configuration, Tools, and Help.
Please use an Ethernet connection for the configuration of the DP-G310. Using a
CAT5 cable, connect the DP-G310 to the Ethernet-adapter equipped computer in
your network that you will be using for configuration. Open your web browser and
type http://192.168.0.10 in the address box, and press Enter. This set of numbers
is the default IP Address of your Print Server. Please note that the PC’s IP
Address must correspond with the Print Server’s IP Address in the same
segment for the two devices to communicate.
Using the Web Configuration