beautypg.com

Water collecting tray, Changing the light bulb, Vacation and moving care vacation – Avanti 863 YW User Manual

Page 6: Moving, Figure 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

WATER COLLECTING TRAY

As seen in the figure below, you may place the water-collecting tray in the back or in the front, it
is possible to keep colder air in the lower part of cabinet by placing it in the back. (Figure 4)

OPEN

{CeCdt< Qun Mem}

CLOSED
tCotMr AM

lepi

Can^lnttieirviv

Virtue cahfcttitQirjy

CoQfiif ckuiciOft

FIGURE 4

CHANGING THE LIGHT BULB

Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading

to the refrigerator at the main power supply. Failure to do so could result in electrical shock or

personal injury.

To change the refrigerator light:

1 -Remove the bulb cover in front of the themrastat box. Notice there is a screw holding this

cover.
2- Remove bulb.
3- Replace with a 15 watt appliance bulb.
4- Reconnect refrigerator to power supply.

Note:

Be sure to replace bulb with one of the same size and shape.

VACATION AND MOVING CARE

VACATION

Remove all the food if you are going for a month or more. Unplug the refrigerator and clean it.
Rinse well and dry. Keep doors open far enough for air to get in. This will keep odor and mold

from building up.

MOVING

Remove all food. Pack frozen in dry ice. Unplug the refrigerator and clean it thoroughly.

Take out at! removable parts. Wrap all parts and tape them together so they do not shift and

rattle. Screw in the leveling legs and tape the doors shut.
Be sure refrigerator stays in upright position during actual moving and in van. Protect outside of

refrigerator with blanket.

When you get to your new home, refer to page 3.