Parts and features, Water dispenser legs, Patas niveladoras – Avanti WD31 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PARTS AND FEATURES
1. WATER fNTAKE
2. COLD WATER FAUCET (BLUE)
3. ROOM TEMPERATURE WATER FAUCET (WHITE)
4. REMOVABLE DRIP TRAY
5. FRONT PANEL
6. DETACHABLE/ADJUSTABLE FEET
7. COOLING THERMOSTAT
8. CONDENSER COIL
9. POWER SUPPLY CORD
■i
1'
Water Dispenser Legs
These legs are provided to level your water dispenser. All four are packed in plastic bag.
Install prior to connecting unit to electrical outlet and inserting water bottle (see sketch
above).
To install tilt the unit 45 degrees and insert legs provided into designated holes, turn
clockwise until they lock. If floor is uneven then adjust each leg individually as needed.
Patas Niveladoras
Las patas para nivelar el dispensador de agua deben ser colocadas antes de conectar la unidad
al enchufe eléctrico e insertar el botellón de agua. Para instalarlas, incline la unidad unos 45°
e inserte las patas en los agujeros señalados, enrósquelas hasta el tope. Si el piso está
desnivelado, ajuste cada pata individualmente hasta que la unidad quede nivelada.______________
Vea ilustración nrriha.------------------------ -------------------------------------