Installation instructions – AEG 1370-1 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation instructions

All transit devices must be removed before installing and

connecting the appliance.

Proceed as follows:

Using a spanner, remove the bolt on the right at the back of the
machine.

Gently lay the machine on its back, taking care not to squash the
hoses.

This can be done more easily by placing one of the corner pack

ing pieces between the machine and the floor.

Remove the polystyrene packing piece.

Peel off the adhesive strip and carefully remove the right-hand

polythene bag (1), then the left-hand bag (2) by pulling both

towards the centre of the machine.

Removing the

transit devices