ASA Electronics CD3010X - Manual (Page 6)

install Half-sleeve
Set Frequency Spacing Switch
There is a seleclable frequency spacing switch on the
bottom of the unit. Before Installing the unit into the
dastibudiU, cuiiriiiM tlidl the »niluli is sel lu II
ih uorrect
setting for your area of operation.
Europe
Problem Cause Corrective Action
Does not operate (display
does not II No power to yellow wire
No power to red wire Check connection with test light.
Check vehicle fuse with test nghi.
Inline fuse blown Replace fuse.
No power to unit Inline fuseblown Check/r^tacefuse.
No speakers operate
fdisplav llgtits norrrtally) Speaker harness not connected Connect speaker harness.
Check speaker wires.
Not all speakers operate Incorrect spiicds or connections Check all splices and connections.
Speaker wires shorting to chassis
ground or to each other Check splices, insulate all bare wires.
Blowo fuaea Pcwiei wli'a *rMiliiig to ¿rouriU MAke auiA wir« Is rot pinctied.
Speaker wires shorting to ground Msite sure wire is not pinched.
Incorrect fuse/fuse too small install fuse of correct rating.
Eh'2 appears on c&splay Disc loading matfuncbon Press RESET button. Insert disc and try again.
ER-3 appears on display Disc eject malfunctbn Press RESET button. Insert disc and try again.
ER-4. ER-7, Efl-e
appears on display
Oise reading malfunction Try a different dso. The disc may be
damaged ordirty.
ER-B. ER-6 aooears on dISDtav Track chanoe maifunclion Press RESET button. Insert disc and try again.
CP skips too mixiti Receiver mourn is not soltd or
backstrap is not secure Check mounting and backstrap. tighten it
r^eeded