AEG 1263 - Manual (Page 10)

Positioning
10
Set the machine upright and unscrew the remaining two bolts on
the back.
Remove the three plastic pins from the holes in which the bolts
were fitted.
Blank off the holes with the plastic plugs supplied, which you will
find in the bag with the instruction book.
Hint:
Keep ali transit devices for re-use in case you move house.
The machine stands on four adjustable rubber feet which can be
used to compensate any unevenness in the floor or to adjust the
machine to the correct height.
Load
kg Spin speed
rpm
Cycle duration
mins
3 1200 90-100
2 1200 55-65
1 1200 35-40
2 850 80-95
1 850 55-65
0.5 850 30-35
3 1200 65-75
2 1200 35-45
1 1200 30-40
4
35