E-no, F-no, Service centre – AEG MICROMAT DUO 220 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Build-in model
26
To install the appliance in a hanging kitchen cabinet, use
the appropriate mounting frame.
Note the relevant Instructions for Installation and Connection.
The oven must be connected by means of a proper plug and pro
tected with a 16-A-L automatic or a 16 amp slow fuse.
When the oven is installed, there must be a possibility of discon
necting it from the mains with a contact break of at least 3 mm on
all poles.
A suitable size of LS switch, or a melting or fly-out fuse, are suit
able contact-breakers.
Service centre
If you cannot find any reference to a particular fault in the operat
ing instructions, please contact AEG Service.
When doing so, quote the E-No, and F-No. of your oven, which
you will find on the rating plate (arrow).
Indication of these numbers helps the Service centre to identify
the required spare part so that the engineer can repair the oven
on his first visit, thus saving you additional costs caused by re
peated trips of the service engineer.
So that these numbers are always to hand, please enter them
here.
E-No.............................................................................................
F-No.............................................................................................