3 camera connection, 4 mouse connection – Q-See QSD371614C4-250 User Manual
Page 9
Operation Manual-4CH Duplex DVR
7
Connect “VIDEO IN” of the monitor to “VIDEO OUT” of the DVR system using the BNC to
RCA cable that comes with the DVR.
5.3 Camera Connection
Connect the included video cables to the “VIDEO IN” of your DVR and “VIDEO OUT” of the
camera with video cable and plug in the camera’s power adapter to the power feed of the
video cable near the DVR.
5.4 Mouse Connection
If you use a PS/2 mouse connect it to the port below on the system. A PS/2 Mouse must be
connected to DVR before startup system. You can also use a USB mouse with a PS/2
Adapter, or attached to the USB port.
“VIDEO OUT” on CAMERA
“VIDEO IN” on DVR