Frying, Cooking – AEG 5210 V User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the
automatic
cooking plate
To use the automatic cooking plate on a manual basis proceed as
follows;
Frying
- Place the frying pan on the hob and turn the control knob to
9
to heat the pan.
Place the food to be fried into the pan and
lower the heat setting to 6. If this is too high or low adjust ac
cordingly.
Cooking
- To
bring the food to the boil
turn the control to
setting 9.
To
reduce the heat turn the control to a setting between 1 and 5 as
required.
Intermediate settings, e. g, 3 • {or *2 on appliances with electron
ic indication) can also be selected,
The chart below will give you some recommendations for the use
of the settings between 1 and 9.
The
automatic system
relieves you of having to turn the control
to 9 first to heat pan and contents and then reduce the heat by
turning to a lower setting as described above.
To use the automatic system proceed as follows:
- Turn control clockwise to
A
to activate the automatic system,
then turn control to a setting between
1 and 8
as required.
Setting 9
is
ineffective
vdien using the
automatic sys
tem.
Turning the control to
A
first provides an initial heat-boost to the
cooking area before it automatically resets itself to the lower
setting chosen. The length of the heat-boost is selected auto
matically by the system. On model 573 V this period is indicat
ed by a light,
- The automatic system can be cancelled by turning the controls
to
0.
19