Playback using the program function, Registration, Switching program playback off – Denon PMD340 User Manual
Page 15
11
ENGLISH
FRANCAIS
DEUTSCH
NEDERLANDS
ESP
ANOL
IT
ALINO
POR
T
UGUES
SVENSKA
D
ANSK
D
ANSK
SVENSKA
POR
TUGUES
IT
ALINO
ESP
ANOL
NEDERLANDS
DEUTSCH
FRANCAIS
ENGLISH
Playback Using the Program Function
Registration
It is necessary to register the tracks to use the program function.
Procedure
(For example, to store P-01, P-02. )
1.
Press the button !3 to stop playback and then press the
PROG
button !1 .
2.
Input the track number to be registered by pressing the
numeric
buttons (0 to 9) o
.
At this point, the
/ENTER
button !7 flashes.
3.
Press the
/ENTER
button !7.
The specified track number is registered in the program as
“P-01”
.
Tip:
Input the track number within five seconds. If the track number
is not input within five seconds, it is cancelled.
4.
The program number than changes to
“P-02”
.
5.
Input the next track number to be registered by pressing
the
numeric
buttons (0 to 9) o.
6.
Press the
/ENTER
button !7.
The specified track number is registered in program
“P-02”
.
7.
The program number than changes to
“P-03”
.
8.
When you have registered all the required tracks, press
the
PROG button
!1 or the
/EXIT
button !3.
The CD player will then exit the program registration mode
and enter the program play mode.
Tips:
- A maximum of 20 tracks can be registered in the program.
- To stop program registration, press the PROG button
!1
or
the /EXIT button
!3
.
- Program play can be switched off via the MODE menu.
To clear a registered Track
Procedure
(For example, to clear P-02.)
1.
Press the button !3 to stop playback, and then press the
PROG
button !1.
2.
The program number “P-01” is displayed.
At this point, the
CUE/CLEAR
button !5 flashes.
3.
Press the
button !4, so that program number “P-02” is
displayed.
Tip:
If the
button
!4
is pressed, the program number that is dis-
played increases by one. If the
button
!2
is pressed, the
program number that is displayed decreases by one.
4.
Press the
CUE/CLEAR
button !5.
“P-02” is cleared and
“P-02 Trk - -”
is displayed on the
display E .
Switching Program Playback OFF
Procedure
1.
Press the
MODE
button @2.
2.
Select the playback mode so that
“Program: On”
is displayed
in the character display portion of the
display
t.
3.
Press either the
button !2 or the
button !4 to change
the display to
“Program: Off”.
4.
Press the
/ENTER
button !7 to confirm the setting.
5.
Press the
/EXIT
button !3 to exit the playback mode menu.
6.
When the
button !7 is pressed, normal playback begins.
ENTER
CLEAR
CLEAR
ENTER