beautypg.com

Setting the equalizer, Setting the dynamic soundstage organizer (dso), Dso) – Sony CDX-CA750 RU User Manual

Page 27: N 27

background image

27

01GB02CD-EUA.fm

masterpage:Right

CDX-CA750X/CA750

3-228-151-21 (1)

Setting the equalizer

You can select an equalizer curve for seven
music types (Vocal, Club, Jazz, New Age, Rock,
Custom, and Xplod).
You can store and adjust the equalizer settings
for frequency and level.

Selecting the equalizer curve

1

Press

(SOURCE)

to select a source

(radio, CD, or MD).

2

Press

(EQ7)

repeatedly until the

desired equalizer curve.

Each time you press (EQ7), the item
changes.

To cancel the equalizing effect, select “off.”
After 3 seconds, the display returns to the
normal playback mode.

Adjusting the equalizer curve

1

Press

(MENU)

.

2

Press either side of

(DISC/PRESET)

repeatedly until “EQ7 Tune” appears,
then press

(ENTER)

.

3

Press either side of

(SEEK)

to select

the desired equalizer curve, then
press

(ENTER)

.

Each time you press (SEEK), the item
changes.

4

Select the desired frequency and level.

1

Press either side of

(SEEK)

to select

the desired frequency.

Each time you press (SEEK), the
frequency changes.

62 Hz

y

157 Hz

y

396 Hz

y

1.0 kHz

y

2.5 kHz

y

6.3 kHz

y

16 kHz

2

Press either side of

(DISC/PRESET)

to adjust the desired volume level.

The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.

5

Press

(MENU)

twice.

When the effect setting is complete, the
normal playback mode appears.

Setting the Dynamic
Soundstage Organizer (DSO)

If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).

1

Press

(SOURCE)

to select a source

(radio, CD, or MD).

2

Press

(DSO)

repeatedly until “DSO

on” appears.

To cancel the DSO function, select “DSO off” in
step 2.

This manual is related to the following products: