AEG VAMPYR 831I User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Mains connection/Rex rewind

The mains cable is located in the cable compart

ment. Press the foot button for the cable, and pull

the cable out. Insert the plug into the socket.

At the end of vacuuming switch off and pull the plug
out of the socket. Press the flex rewind button and
the cable rewinds automatically.

Using the cleaning head and accessory nozzles

The cleaning head and nozzles are attached to the suction tube by pushing and
twisting, and taken apart again by twisting and pulling.

Using the floor cleaning head

For care of carpets and hard floors, the cleaning
head can be adjusted to suit the type of floor with
your foot:

for carpets

Symbol for carpet, brush withdrawn

for hard floors

Symbol for hard floor, brush extended

For other optinal extra floor cleaning heads see
Special Accessories.

Accessory Nozzles - Furniture Brush, Crevice and Upholstery Nozzles

The integrated accessories compartment contains

3 nozzles-afurniture brush, acrevice nozzle and a

upholstery nozzle. Open the compartment by
pressing lightly on the cover as shown in the illus

tration.