AEG VAMPYR 831I User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Importaiit for users in the UK

The wires in the mains lead of this appliance are coloured in accordance with the fol

lowing code;
BLUE-neutral

BROWN-live

As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, PROCEED AS
FOLLOWS:
The wire which is coloured BROWN must be connected to the terminal which is

marked L or coloured RED.

The wire which is coloured BLUE must be connected to the terminal which is

marked N or coloured BLACKI
If a 13 amp plug is fitted, fit a 13 amp BS1362 fuse. If any other type of plug is used, pro

tect with a 15 amp fuse at the distribution board.

For appliances which come with mains lead and plug moulded on: the plug mould
ed on to the cord incorporates a fuse. For replacement use a 13 amp BS1362 fuse.
Only ASTA approved or certified fuses should be used. The fuse cover/carrier must
be replaced in the event of changing the fuse. The plug must not be used if the fuse
cover/carrier is lost A replacement cover/carrier must be obtained from authorised
electrical goods retailers.

WARNING

Should it become necessary to replace the moulded on plug then the defective plug
should be destroyed.