Connecting your mg5220 to your network, Step 5, Step 6 – Canon Installing Multifunction PIXMA MG5220 User Manual
Page 7
Connecting Your MG5220 To Your Network
7
Step 5
Select the access point name you
wrote down, then press the OK
button.
Step 6
Make sure that one of the below
screens is displayed, then press the
right FUNCTION button.
Note:
•
Nearby access points may be detected.
•
Access point names with 2-byte characters are not
displayed properly, however, they can be selected.
If neither is displayed, go to Step 9.