Avanti WC600CL - Manual (Page 10)

' SHELVES:
Shelving is chrome plated. To accommodate different size bottles, they can be moved up or down by
sliding them out the tracks first. Shelves are designed to accommodate maximum amount of bottles.
(See page 6)
^ DOOR LOCK:
For safety and security, your unit is equipped with a door lock and key. Door will not lock until the key
is removed. This eliminates the risk of accidental child entrapment. Two keys are included with your
lock.
CARE AND MAINTENANCE
CHANGING THE LIGHT BULB
NOTE:
All parts removed must be saved to do the replacement of the light bulb.
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity
leading into the refrigerator at the main power supply. Failure to do so could result in
electrical shock or personal injury.
Push the light switch ’‘OFF".
Remove the light bulb cover (1) by pulling the bottom end of the light bulb cover gently.
Unscrew the bulb (2).
Replace with a 10 watt-refrigerator bulb that is the same shape and size.
Replace the light bulb cover and tighten screw (1).
Note: Light bulb should not exceed 15 watts.
> Cleaning Your Wine Cooler
• Unplug the wine cooler and remove the bottles.
• Wash the inside with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
^ The outside of the wine cooler should be cleaned with mild detergent and warm water.
• it may also be necessary to periodically wipe the bottom part of the storage area, as the wine
cooler is designed to retain humidity, and condensation may collect there.
> Maintenance of Your Wine Cooler
• Power Failure
Most power failures are corrected within a few hours and should not affect the
temperature of your wine cooler if you minimize the number of times the door is opened.
If the power is going to be off for a longer period of time, you need to take the proper
steps to protect your contents.
> Vacation Time
10