AGA G.C.P.V. User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

p[ug. Turn temperature control knob 2 to the mid position of the green band for normal running.

7. On the first lighting or if the cooker has been cold for a long time, moisture from the insulation may run down
the enamelled front of the cooker. This should be wiped off to prevent staining.

Once the correct setting has been confirmed the heat control will operate automatically to maintain the cooker at
full temperature.

NOTE: AFTER SEVERAL HOURS THE HEAT INDICATOR SHOULD BE ON OR ABOUT THE BLACK LINE IN

THE SILVER SECTION. IT MAY BE NECESSARY TO ADJUST THE CONTROL KNOB SLIGHTLY IN THE

GREEN BAND TO ACHIEVE THIS.

IF THE FLAME HAS EXTINGUISHED FOR WHATEVER REASON, WAIT THREE MINUTES (MINIMUM),
BEFORE RE-LIGHTING.

NOTE: REMEMBER TO NOTE THE SETTING POSITION IF TURNING OFF THE COOKER

TO EXTINGUISH THE BURNER

Turn the gas valve control to the OFF position (see Fig. A).