Harbor Freight Tools Model 94275 User Manual
Page 11
SKU 94275
For technical questions, please call 1-800-444-3353.
PAGE 11
Use the pattern in Figure 3 as a reference, or hold the assembled Dust Reclaimer
4.
against the wall where you intend to mount it, and mark the drill hole positions
through the mounting holes.
Drill holes in the wall to except the Wall Anchors (33). Use a concrete drill bit that
5.
is 5/16” diameter.
Figure 3
1.57”
1.57”
9.73”
NOTE: The Wall Anchors (33) are intended for concrete walls. If you are attaching the Dust
Reclaimer Kit to drywall or wood you will need different fasteners (not included).
CAUTION! When mounting the Dust Reclaimer to a wall surface, make sure that the
wall and the mounting hardware used are capable of supporting the weight of the Dust
Reclaimer and its contents. Prior to drilling mounting holes in a wall surface, check to
make sure there are no hidden electrical cables, gas or plumbing pipes in the drilling
path.
9.52”
9.52”