Guarantee for uk sales – Arcam Alpha 3 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Arcam Alpha 3 handbook
Guarantee for UK sales
This equipment has been fully tested and a full record of these
tests made before despatch from the factory. Both the workmanship and the
performance of this equipment are (except as set out below) guaranteed
against defects for a period of two years from the date of purchase, provided
that it was originally purchased from an authorised UK dealer under a
consumer sale agreement. ( The words "consumer sale" shall be construed in
accordance with Section 15 of the Supply Of Goods (Implied Terms ) Act
1973 ).
The manufacturers can accept no responsibility for defects
arising from accident, misuse, abuse, wear and tear, neglect or through
unauthorised adjustment and/or repair, neither can they accept responsibility
for damage or loss occuring during transit to or from the person claiming under
this guarantee.
This guarantee covers both labour and parts, and is
transferable to subsequent purchasers, but the liability of the manufacturers is
limited to the cost of repair or replacement of the defective parts ( at the
discretion of the manufacturers) and under no circumstances extends to
consequential loss or damage.
Guarantee for overseas sales
Equipment not purchased in the UK is generally guaranteed
by the distributor in the country of purchase only. For further details, please
contact your distributor.
Claims under this guarantee
This equipment should be packed in the original packing and
returned to the dealer from whom it was purchased or, failing this, to any other
authorised Arcam dealer. If it is not possible to return the equipment by hand,
then it should be sent carriage prepaid by a reputable carrier. If the original
packing is not available, replacement packing can be purchased from the
manufacturers. The equipment should NOT be sent by post.
If you have any difficulty complying with these requirements,
please contact the manufacturers at the following address:
ARCAM,
Pembroke Avenue,
Denny Industrial Centre,
Waterbeach,
Cambridge,
CBS 9PB,
England.
Telephone; ( 0223 ) 440964
Fax; ( 0223 ) 863384
In either case you should state clearly your name and
address, the date and place of purchase together with a brief description of the
fault. In the event of equipment being returned which, after having been tested,
is found to comply with the published specification, the manufacturers reserve
the right to charge a reasonable fee for testing the equipment, and for the
return carriage.
Enquiries
The manufacturers are happy to answer any queries you may
have regarding the use of this equipment on the condition that this enquiry is
by letter and a stamped addressed envelope is provided. You should state
clearly the serial number of the unit, the dealer from whom it was purchased,
and the date of purchase.
DO NOT CONSIGN THE EQUIPMENT TO ARCAM UNLESS YOU HAVE
BEEN SPECIFICALLY REQUESTED TO DO SO BY THE MANUFAC
TURER’S TECHNICAL SALES OR SERVICE DEPARTMENTS. DO NOT
UNDER ANY CIRCUMSTANCES ATTEMPT TO DISASSEMBLE THE
EQUIPMENT BEFORE DESPATCH.
THIS GUARANTEE IN NO WAY VARIES OR REMOVES A PURCHASER’S
STATUTORY RIGHTS.
Part number SH018B
Issue 2 10/91
page 6