Technical specification, Both channels, Harmonic distortion – Arcam Delta 60 User Manual
Page 11: Frequency response, Disc, Line, Inputs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Delta 60 integrated amplifier handbook
Technical specification
OUTPUT POWER (typical)
Both channels
8 ohms 55W
(20Hz to 20kHz, 0.5% THD)
Single channel
8 ohms 60W
4 ohms 95W
Peak current delivery
± lOA
Harmonic distortion
SOW, 8 ohms, at 1 kHz 0.02%
FREQUENCY RESPONSE;
Disc
better than +0.3, —0.5dB from 40Hz-35kHz,
typ. -3dB at 20Hz
Line
± 0.5dB 30Hz to 35kHz
typ. -3dB at 10Hz, 80kHz
INPUTS
Disc, Moving Magnet
Sensitivity 1.9mV
Noise (CCIR)-76dB
Input impedance 47k ohms/I OOpF
Overload margin at 1 kHz 32dB
11
Disc, Moving Coil
Sensitivity 1 90/
a
V
Noise (CCIR) -68dB
Input impedance 220 ohms/4.7nf
Overload margin at 1 kHz 32dB
Tuner, Tape 1+2
Sensitivity 220mV
Noise (CCIR) ref. 1 W output -84dB
Input impedance I Ok ohms
Overload margin at 1 kHz 50dB
CD
Sensitivity 360mV
Input impedance 6k ohms
OUTPUTS
Tape 1 and 2
Nominal output 220mV
Output impedance 2k ohms
Crosstalk all inputs 70dB at I kHz
Power consumption
250VA maxirrium
Dimensions
430 mm wide
64 mm high
295 mm deep (excluding knobs)
Weight
5 kg Net
6 kg Packed