Choice of burner {fig. 6) – Avanti ELITE DG200W User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO USE THE TOP BURNERS
Figure 6
CHOICE OF BURNER
{fig. 6)
The symbols printed on the panel above the gas knobs indicate the correspondence
bet\ween the knob and the burner.
The most suitable burner is to be chosen according to the diameter and volume capac
ity of the container to be warmed.
It is important that the diameter of the pots or pans suitably match the heating poten
tial of the burners in order not to jeopardise the efficiency of the burners, bringing about
a waste of gas fuel.
A small diameter pot or pan placed on a large burner does not necessarily mean that
boiling conditions are reached quicker.
DIAMETERS OF PANS WHICH MAY BE USED ON THE TOP BURNERS
BURNER
MINIMUM
MAXIMUM
Auxiliary
4“ 23/32 (12 cm)
5" 1/2 (14 cm)
Semirapid
6“ 19/64 (16 cm)
9" 7/16 (24 cm)
Rapid
9" 7/16 (24 cm)
10" 15/64 (26 cm)
Do not use pans with concave or convex bases
Figure 7
Make sure that the handles of cookware
do not stick out over the edge of the
range, to avoid them being knocked
over by accident. This also makes It
more difficult for children to reach the
cooking vessels.
10