Black & Decker 7114 - Manual (Page 6)

CLEANING & LUBRICATION
Use only mild soap and a damp cloth to clean the tool. Many household
cleaners contain chemicals which could seriously damage the plastic.
Also, do not use gasoline, turpentine, lacquer or paint thinner, dry
cleaning fluids or similar products. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Self lubricating bearings are used In the tool and periodic relubrication
is not required. However, it is recommended that, once a year, you take
or send the tool to a 6&D Service Center for a thorough cleaning,
inspection and lubrication of the gear case.
IMPORTANT
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (Including brush inspection and replacement), should be
performed by Black & Decker Service Centers or other qualified service
organizations, always using Black & Decker replacement parts. When
servicing Double-Insulated Tools, it is extremely important that ONLY
IDENTICAL REPLACEMENT PARTS BE USED and that REASSEMBLY OF
TOOL IS IDENTICAL TO THE ORIGINAL ASSEMBLY.
HOME USE WARRANTY
(A FULL ONE YEAR WARRANTY)
Black & Decker warrants this product for one year against any defects
that are due to faulty material or workmanship. Please return the
complete unit, transportation prepaid, to the seller (if a participating
retailer) for free replacement (proof of purchase may be required). The
unit may also be returned to a Black & Decker Service Center or
Authorized Service Station, listed under “Tools Electric“ in the yellow
pages for free replacement or repair at our option. This warranty does
not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state. Should
you have any questions, contact your nearest Black & Decker Service
Center Manager.
THE BLACK & DECKER MFC. CO.
Towson, Md. 21204, U.S.A.
Form No. 97184-03 (NOV76-PS) Printed in U.S.A.