Altec Lansing 1218A User Manual
М2м8a muskal instrument speaker system i2i8a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
М2М8A Muskal Instrument Speaker System
I2I8A
Designed to meet the high performance standards of professional musicians, the ALTEC
1218A Musical Instrument Speaker System is rated to handle up to 50 watts of continuous
power and produces an extremely wide angle of coverage to afford maximum listening
enjoyment.
All components of the 1218A speaker system are carefully matched:
421A-type (422-8Z) Low-Frequency Musical Instrument Loudspeaker . . . 15" woofer
for high efficiency in reproducing bass and mid-bass sounds. 3" edge-wound voice coil,
rigid cast aluminum frame, powerful magnet.
8118 High-Frequency Sectoral Horn
from 800 Hz to beyond audibility.
massive, cast aluminum, 25" wide. Operates
807-8Z High-Frequency Driver . . . has an extremely rugged voice coil and diaphragm
assembly that handles much more power than conventional drivers. Uniform response
from 500 to 20,000 Hz.
N809-8A Dividing Network ... precision two-section crossover network with HF attenua
tion control, 800 Hz crossover and 12 dB/octave slope. Two phone-jack paralleled inputs.
A sturdy wooden bass reflex enclosure provides excellent bass and mid-bass reproduction.
The 1218A has a resilient epoxy spatter finish. It is portable and is fitted with a tubular
swivel mount, recessed die-cast handles and removable latching front cover. Standard phone
jacks for cable connections and a 50-foot cable accessory make handling and setup easy.
Detailed specifications and descriptions of 1218A system components can be obtained from
their respective ALTEC catalog sheets and brochures.
1515 S. Manchester Ave., Anaheim, Calif. 92803
A DIVISION
OF
ALTEC CORPORATION
□