Voice recording, I] fm radio, V001.wav – Beko MP 300 R User Manual
Page 8: Fm radio
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

to show the provided options.
(3) Select "Equalizer* and press the ®
button to confirm.
(4) Push the ® button leftwards or
rightwards to select the desired EQ
mode, and press the ® button to
confirm or press the Ml button to
cancel and return.
• Delete Single Track
You can delete track following these
Voice recording
steps:
(1) Shortly press the ® button to enter
the folder navigation mode.
(2) Select the folder or track that you
want to delete.
(3) Press the button to delete it.
(4) Push the ® button leftwards to
select the ’Yes" option and press
the ® button again to confimn
deletion, or press the >ll button to
cancel deletion.
• Record
(1) In the Music mode, press and hold
the button to start voice
recording.
(2) When you see the following screen,
speak into the built-in microphone.
(3) To stop recording, press the
button again. A voice file named as
VOOY.WAV (where Y is the
sequence number) Is created. Now,
you can press the Wll button to
play the voice file that you just
recorded.
• Play Voice RIe
(1) On the main menu, select the "Voice'
item to ertter the Voice mode.
(2)
Select the file that you want to play
and press the Ml button to play it.
Alternatively, you can enter the navigation
mode, open the Voice folder and select
the voice file that you want play.
Bit rate SamplB rate
•BEC
32kbps 8KHz ®
V001.WAV
00:00:30 00:02:30
i:(|0:30 00:0|::
Sapsed lime Remaining time
CD
i ]
FM Radio
On the main menu, select * SI' and
press the Menu key to turn on the FM
radio.
• Auto-Search Broadcasting Station
(1) Shortly press the ® button to show
the submenus.
(2) Select "Scan Staton" and then press
the® button to confirm.
(3) The radio automatically searches
for stations from 87.6 MHz to 108
MHz, The received stations will be
saved as preset stations automatically.
•
• Search Broadcasting Station Manually
(1) When you see 'Staiion' displayed,
press the Wl button to exit "Station*
mode.
(2) Push the ® button left or right to
decrease or increase frequency by
0.1MHz.
• Listen to Station
In the 'Station* mode, push the ®
button left or right to tune in saved
stations.
Note: If you are in the "Manual* mode,
press the >0l button to switch to the
"Station* mode.
6
' Save Broadcasting Station