Beko MP 300 R - Manual (Page 11)

Problem Possible Cause Solution
The player cannot be
connected to the PC.
1. The driver is not instalied
or destroyed.
2. The USB interface is not
supported by PC's
motherboard.
1. Install or reinstall the driver
shipped with the player.
2. Update or replace the
PC's motherboard.
The displayed time is
changing constant^.
The bit rate of the MP3 file
is changing during
playback
Try to use fixed bit rate to
compress the MP3 file.
The PC has error when
you plug and unplug
the player.
The player Is disconnected
from the PC abrupt^ while
transferring files.
Do not disconnect the player
from the PC when transferring
files.
Total memory dispbyed
on the player is not in
accordance with the
marked amount.
Part of memory Is used to
store programs and
display characters.
Some of MP3 files
cannot be played
proper^.
The MP3 file is
compressed by a
standard, such as MPEG
I Layer 1 or Layer 2 that
the player does not
support.
1. Delete the unsupported
MP3 files.
2. Use MPEG I Layer 3
standard to compress the
unsupported MP3 files.
Technical Specifications
Item Specification
Capacity 2 GB
Battery Type AAA-size alkaline
Battery Life 13 Hours
OLED 128X32 Pixel, OLED
Earphone Power 5mW+5Mw
Output Frequency 20HZ-20KHZ
Record Sample Rate 8kHz, 11.025kHz, 16kHz
Audio File Format MP3, WMA
DRM-WMA (for EM739SA/SB/SF, 839SA/SB/SF)
Record Format WAV