Save these instructions, Grounding – Chicago Electric 20 Gallon Parts Washer With Wheels 98332 User Manual

Page 5

SKU 98332

For technical questions, please call 1-800-444-3353.

Page 5

approved safety equipment, such as

those dust masks that are specially

designed to filter out microscopic

particles. (California Health & Safety

Code § 25249.5, et seq.)
Cleaning may produce Aluminum

Oxide dust which can cause eye, skin

or breathing irritation. Always use a

NIOSH approved respirator, safety

goggles and rubberized gloves when

operating this tool.
Always use water based solvents

when operating this tool. Water based

solvents have a pH greater than 7.

Use of other types of solvents may

cause injury.
DO NOT use any highly flammable,

volatile or combustible solvents such

as gasoline, kerosine, etc. in this tool.
Parts being cleaned may deposit oil,

grease, gasoline or other combustible

contaminants in the tool. Check for

volatile fumes, and use this tool only

in a well-ventilated area.
WARNING: Chlorinated solvents

10.

such as 1-1-1 Trichloroethane and

Methylene Chloride can chemically

react with aluminum and may ex-

plode. Many parts contain aluminum.

Do not clean aluminum parts with

these solvents.
WARNING: Handling the cord on

11.

this product will expose you to lead,

a chemical known to the State of

California to cause cancer, and birth

defects or other reproductive harm.

Wash hands after handling. (Califor-

nia Health & Safety Code § 25249.5,

et seq.)
The warnings, precautions, and in-

12.

structions discussed in this instruction

manual cannot cover all possible con-

ditions and situations that may occur.

It must be understood by the operator

that common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

saVe these

instructions.

GroundinG

to PreVent

electric shocK

and death From

incorrect GroundinG

Wire connection:

Check with a qualified

electrician if you are in doubt

as to whether the outlet is

properly grounded. do not

modify the power cord plug

provided with the tool. never

remove the grounding prong

from the plug. do not use the

tool if the power cord or plug

is damaged. if damaged, have

it repaired by a service facility

before use. if the plug will not

fit the outlet, have a proper

outlet installed by a qualified

electrician.