Audiovox AVP7180 - Manual (Page 16)

SYMPraMS CAUSE POSSIBLE SOLUnOHS
Play mode indicated no audio or video to
TV. jcontinued from the pnevious page) 4 VCP connected by |75 OHM coax)
artenna coax to TV.
Set in "monitor mode".
4 Switch to TV mode.
4 VCP corrected to A/V output jacks.
(AVT-1400 or 1475)
4 Change connections tram A/V output
to A/v input.
4 Output of VCP A/V RCA cables w coax
not connected to TV input.
4 Check connector between VCP and TV.
4 Swjtchabia input device used between
TV and VCP (game prep).
4 Poor connection batwaer VCP output
and TV input.
4 Check conrettionfa).
4 Reversed A/V iopute to TV. 4 Check correctionfb).
4 Shorted coax cable between VCP and
TV.
4 ChBCk cable/by pass or continuity test.
■ r
Poor video/snowy picture or lines or
sorean. 4 0‘tty ho^s. 4 Clear 1heed using tape csrtridge
cleaner. We recommeod using
cartridge with doth or paper tape and
cleaning drops Included.
4 These are re^ify eveilabfe at retail
stores. I
SPECIFICATION
MODEL AVP-T1«
POWER SUPPLY ; DC1ZV ^
POWER CONSUMPTION 12W
DIMENSION 26Sx 91 X295(WXH xQ)mm
WEIGHT APPROX. 3.4 kg
VIDEO SIGNAL SYSTEM NTSC Color '
VIDEO signal , output OTVHS 7b u unbalancod AVX.
TAPE TYPE VHS Type
TAPE SPEED SP; 33.35 mm/sec. LP : 22.23 mnVsec, SIP ; 11,12 mm/sec
FF/flEW TIME jM2D) Approx. 5 min
VIDEO SIGNAL OUTPUT (LINE) 1Vpp7S U unbalanced, NEGATIVE SYNC
AUDIO SIGNAL OUTPUT (UN E| -5dBm 10 Hi MAX
OPERATING CONDITION HUMIDITY 85%RHmax. Temperature;5t:~ 35t: ( 4 1 9 5 * F )
OPERATING POWER VOLTAGE 12-14V
Desrfin ancf specflicalicms are aubjeitsd tD itiange wittiQDt fiotioe.