Identification (continuedi, Rear panel, Cd fuse holder – Audiovox AVP7180 User Manual
Page 10: G) rf out channel selectjon switch, 3)ant. in, Identification (continued), Video out, Cd® dc jack in
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IDENTIFICATION (continuedi
REAR PANEL
(1)
i2":
(3!;
CD FUSE HOLDER
This main line fuse is accessible with the external fuse holder
simply by unscrewing the cap. If the main line fuse should
blow then replace the fuse with a proper rated fuse (125V,
2A).
(g) RF OUT CHANNEL SELECTjON SWITCH
Set to channel 3 or 4, whichever is not being broadcastet
your area.
(3)ANT. IN
Connect the TV antenna to this terminal.
12
IDENTIFICATION (continued)
® VIDEO OUT
Connect this terminal to VIDEO IN terminal of your television, using the RCA cord provided.
® AUDIO OUT ITR
Connect this terminal to AUDIO IN terminal of your television, using the RCA cord provided,
(g) RFOUT
Connect this terminal to antenna terminal of your television, using the coaxial cable.
CD® DC JACK IN
Connect this jack to DC source (DC 12V).
NOTE:
This VCP is for 12V use only, so do not use it in 24V vehicles.
If you use this set in a 24V vehicle, all the indicator lamps will blink. To avoid the malfunction of this set, please disconnect the plug from
the power source.