beautypg.com

Bunn – Bunn BT10 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Using the Phillips screwdriver,
replace the four screws that

secure the pour-in bowl.

Replace the top lid by inserting the tab into the rear of the

pour-in bowl ^rst, then replace the two mounting screws.

Wait 15 minutes for reheating before brewing coffee.

Note: Be sure to re^ll the water reservoir if you emptied it prior to performing

the installation (Refer to your owner’s manual for filing instructions).

Please call 1-800-385-2652 should you have any questions

about the installation of your Protective Shield.

BUNN