beautypg.com

Bunn BT10 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Remove the pour-in bowl and set it aside.

NOTE: Save your screws, in case you misplace any of the seven included in

the kit.

Please call

1-800-385-2652

should you have any

questions about the

installation of your

Protective Shield.

A. Gently move the wires and silicone tube aside before putting the Protective Shield in place.

B. Set the Protective Shield over the top of the heater terminals and sprayhead tube and gently push

into place.

C. Make sure the silicone tube is not under the edge of the shield.