Avanti FF8WR User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Important Safety Instructions
WARNING ^
To reduce the risk of fire, electrical shock,
or tniun/ when using your refngerator. follow these
basic precautions:
■' I
' Reac
3l!
instructions before using the refngerator.
' DANGER or WARNING; Risk of child entrapment,
> Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are
stiil dangercus... even if they will "just sit in the garage a few days.”
Before you throw away your old refrigerator or freezer: Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
Never ailcw children to operate, play with, or crawl inside the refrigerator.
Never clean refngerator parts with flammable fluids. Tne fumes can create a fire hazard or explosion.
Oc net store or use gasoline or any other flammable vapors and liquids in the vicinib/ of this or any
other refrigerator. The fumes can create a fire hazard or explosion.
- Save these instructions -
INSTALLATION INSTRUCTIONS
* Before Using Your Refrigerator
• Remove the exterior and interior packing.
«Check to be sure you have all of the following parts;
■ Twist Ice maker.
• 1 Ice cube container.
• 1 Egg case.
• Before connecting the refrigerator to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a maifunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
* installation of Your Refrigerator
• This appliance is designed to be free standing only, and should not be recessed or buitt-in.
• Place your refrigerator on a floor that is strong enough to support the refrigerator when it is fully loadec
To level your refrigerator, adjust the legs at the front of the refilgerator.
• Allow 6 inches of space between the walls and the refrigerator, which allows the proper air circulation
to cool the compressor.
• Locate the refrigerator away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
Extreme cold ambient temperatures may also cause the refrigerator not to perform property.
• Avoid locating the refrigerator in moist areas.
• Plug the refrigerator into an exclusive, properly installed grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions conceminc
power and or grounding should be directed toward a certified electrician or an authorized Avanti
Products service center.
• After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing
food in the freezer or refrigerator compartment.