Changing the reversible door – Avanti 31YWT User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGING THE REVERSIBLE DOOR
1. Remove the leveling leg attached to the bottom hinge.
2. Remove the two screws and washer that holds the
bottom hinge to the cabinet, using a {+) screwdriver.
Keep these screws and washer for later use.
3. Lower the refrigerator door straight down to free the
middle hinge pin from the socket on the top of the door
and pull forward.
4. Place the door on a padded surface to prevent
scratching it.
5. Remove the other leveling leg on the opposite side.
6. Remove the two screws that holds the middle hinge to
the cabinet using, a (+) screwdriver. Keep these
screws for later use.
7. Lower the freezer door straight down to unlock the
bolt-pins of the countertop from the socket on the top
of the door and pull forward.
8. Remove the bolt-pin of the countertop using {+)
screwdriver attached to the countertop. Save this
bolt-pin for later use.