Blanco 511-600 - Manual

BLANCO
SINK SPECIFICATIONS
SILGRANIT® Platinum Series
BLANCODiAMOND™ EQUAL DOUBLE BOWL Drop-in
Models 511 -600, 511 -601, 511 -602, 511 -603, 511 -604
FEATURED MODEL
511-603 Metallic Gray, 9-1/2" & 9-1/2" bowl depths
ADDITIONAL MODELS
511-600 Biscuit, 9-1/2" & 9-1/2" bowl depths
511-601 White, 9-1/2" & 9-1/2" bowl depths
511 -602
Anthracite, 9-1 /2" & 9-1 /2" bowl depths
511-604 Café Brown, 9-1/2" & 9-1/2" bowl depths
FEATURES
• Flat sink deck allows for both drop-in or
undermount Installation
• 80% rock hard granite
• Color all the way through
• Highly resistant to scratching, staining and all
household acids and alkali solutions
• Non-porous, easy-to-clean
• Heat resistant to 536° F
• Extremely hygienic, does not absorb odors or bacteria
CODE/STANDARDS CDMPLIANCE
ANSI Z124.6-97
lAPMO/UPC listed
OPTIONAL ACCESSORIES
Sink Grids: 221-008 (Formerly 511-933L)
221 -009 (Formerly 511-933R)
Colander: 215-651
Cutting Board: 511-132
WARRANTY
Blanco America’s SILGFiANIT® Series sinks feature
a LIMITED LIFETIME WARRANTY to be free of all
manufacturing defects under normal use. See our
complete warranty for details.
While Blanco America endeavors to provide accurate Information,
all dimensions are nominal, cannot be guaranteed, and are
subject to change or cancellation. Blanco America assumes no
responsibility for use of superseded or voided specifications.
PRDDUCT SPECIFICATION
Drop-ln/Undermount sink to be equal double bowl
design, 33" in length and 22" in front-to-back depth.
Sink to be made from Silgranit® hard composite
material. Sink to feature rear drain placement and
straight bowl sides with 5/8" cutout corner radius. Sink
to be Blanco (Check one)
□ Model 511 -600 □ Model 511 -601
□ Model 511 -602 □ Model 511 -603
□ Model 511-604
with left bowl depth of 9-1/2" and right bowl depth of
9-1/2". Additional knockout hole locations:___________ .
□ Biscuit 511-600
□ White 511-601
□ Anthracite 511 -602
□ Metallic Gray 511 -603
□ Café Brown 511 -604
MODEL 511-603 Shown
NOMINAL DIMENSIONS
CUTOUT BOWL DEPTH DRAIN
OVERALL SIZE LEFT RIGHT DIAMETER
33x22 32-1/4x21-1/4 9-1/^ 9-1/^ 3-1/2
DXF cutout templates {Undermount and Drop-In version)
available on our web site.
JOB INFORMATION
Job Name:___________
Contact:
KNOCKOUT HOLE LOCATIONS
Pre-drilled for single-hole faucet.
Date Specified:
Specifier:_______
Contractor:
BLANCO AMERICA
800.451.5782
www.blancoamerica.com
© 2008 BLANCO AMERICA
06/08 SPEC-003