CycleOps PowerTap - Manual (Page 15)

TORQUE FUNCTION
Shows the torque placed on the hub in inch-pounds. To display torque
in trip mode:
1) Press [MODE] to scroll the cursor to the top line of the main display.
2) Press [SELECT] until the current power function is displayed.
3) Hold [SELECT] until the word ‘WATTS” begins to flash. A blinking “WATTS” display indicates
the torque function is currently displayed.
4) Press [SELECT] to return to the current power function. (FIGURE 12).
3
MI
D
000
25
58.I0
15
FIGURE 12