CycleOps PowerTap - Manual (Page 12)

General Computer Operation
DISPLAY LEVELS
The computer has three (3) main display levels:
Top • Power
Middle • Speed
Bottom • Multi-Function
Display
NOTE: These locations only apply to trip and
interval modes and does not apply to Cycle
Computer
or Heart Rate Monitor Function . See COMPUTER SETUP 4
to customize display options.
DISPLAY MODES
The computer has two (2) main modes of operation:
1) Trip
2) Interval
Hold [MODE] to toggle between display modes.
BUTTONS
There are two (2) buttons on the computer:
1) [Mode]
2) [Select]
NOTE: [BRACKETED] words indicate buttons.
There are five (5) types of button presses:
1) Press [MODE] or [SELECT] - a single press and release of either [MODE] or [SELECT].
12
TRANS.
ICON
INTERVAL
DISPLAY
MODE (LEFT)
POWER
DISPLAY
SPEED
DISPLAY
MULTI
DISPLAY
BOTH SELECT (RIGHT)
Changes active
mode Clear data
Enter setup Select function