Concord Camera 3103 - Manual (Page 16)

Preparing to Take Pictures
12
Power Save Settings
You may perform power save settings while in any Mode.
( )
1. Press the Menu button.
2. Then press the RIGHT button until the SETUP MENU ( )
appears.
3. Press the DOWN button ( ) to POWER SAVE.
4. Press the SET button to enter the POWER SAVE menu.
5. Press the UP/DOWN buttons to adjust the setting.
6. Press SET again to confirm your setting.
Note: The default setting is “1 minute”.
1 minute: The LCD screen on this camera will automatically turn off if there
is no activity for one minute. Pressing any button will illuminate
the LCD.