Canon FB630U User Manual
Page 61
61
A P P E N D I C E S
Scan button cannot be selected
➤
Solution 1: A scan cannot be performed if the scan area is set too small (less
than 64 x 64 pixels). Increase the size of the scan area
➤
Solution 2: A scan cannot be performed unless a scan area is specified. Specify a
scan area
➤
Solution 3: A scan cannot be performed if the required memory is larger than
the free memory. Change the resolution
or scan area
until the required memory is lower
Problem:
The “Insufficient Memory” error message appears when
scanning
➤
Solution 1: Select the smallest possible area and rescan
➤
Solution 2: Lower the resolution and magnification settings for the output
device to the lowest possible values
➤
Solution 3: Close all other software applications other than Adobe PhotoDeluxe
2.0, then try scanning again
➤
Solution 4: Close all software applications including Adobe PhotoDeluxe 2.0,
then restart Adobe PhotoDeluxe 2.0 and scanning again
➤
Solution 5: Shut down Adobe PhotoDeluxe 2.0 and all other applications and
increase the amount of free memory, then start Adobe PhotoDeluxe
2.0 again. For details about increasing the amount of free memory,
see the Adobe PhotoDeluxe 2.0 (or other software application
manual)
➤
Solution 6: Increase the amount of RAM as required